Δ STANDARD CONFIGURATION
1) Powered by brand new original CUMMINS water cooled diesel engine.
2) Brand new STAMFORD, LEROY SOMER or GENLITEC single bearing 3 phase alternator with IP23 and H insulation class.
3) Original CUMMINS 50ºC radiator with engine driven fan mounted on skid.
4) Delixi or Chint branded case circuit breaker mounted.
5) Heavy-duty fabricated steel based frame with built-in fuel tank for at least 8 hours continuous running.
6) Complete set mounted on a based frame with anti-vibration mountings.
7) Industrial 9 dB muffler exhaust system with blexible connects and bellows.
8) Based frame with fuel, oil and coolant drain cocks for easy maintenance.
9) 12/24V DC electric start system with free maintain battery & smartgen brand battery charger.
10) Set mounted automatic control panel, with SMARTGEN brand AMF controller module for automatic start & stop.
11) Test report of generator, set of drawings and manuals.
12) CE, ISO9001 approved
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
1) Parts faults testing
2) Fuel tank pressure testing
3) Bolt tightening torque testing
4) Painting thickness testing
5) Voltage bearing and insulation testing
6) Noise testing
7) Loading Testing: 25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.
Δ OPTIONAL SUPPLY
1) Weatherproof canopy / Soundproof canopy / Trailer-mounted
2) Engine / Alternator Pre-heaters
3) Auto load sharing & synchronization panel
4) Build-in ATS (Auto start & stop Main Failure (AMF)
5) Large 12/24 hours fuel tank
6) Power output sockets
Δ GENSET SPECIFICATION
GENSET MODEL | GPC500S5 |
Prime Power (50HZ) | 400KW/500KVA |
Standby Power (50HZ) | 440kw/550KVA |
Power Factor | 0.8 (Lagging) |
Phase Wires | 3-phases 4-Wires |
Start Model | 24V Electric |
Protection | Low oil-pressure, High water temperature, |
Over-speed, Over-current | |
DIESEL ENGINE SPECIFICATION | |
Engine Model | CCEC Cummins KTA19-G3A 4-Cycle |
Cylinders | 6 |
Cylinder Arrangement | L |
Bore x Stroke(mm) | 159X 159 |
Compression Ratio | 13.9:1 |
Speed | 1500rpm |
Cooling Method | Water - cooled |
Starting Method | 24V DC electrical start |
100% Load Diesel Consumption | 97L/H |
Engine Displacement | 19L |
Inspiration | Turbocharged Intercooled |
Lube Volume | 50L |
Coolant Volume | 95L |
Noise Level | ≤ 80 DBA |
ALTERNATOR SPECIFICATION | |
Alternator Model | Original Stamford HCI544C |
Alternator Power | 400KW/500KVA Brushles with AVR |
Voltage | 380/220V,400/230V,415/240V,220/127V |
Protection | IP23 |
Voltage Regulation | ±1% |
Insulation Class | H |
Voltage Control | AVR |